Short-term rental accommodation · NSW

Fire Safety Information & Evacuation Diagrams for STRA Properties

Own or manage an Airbnb, holiday home or short-term rental in NSW? Understand your fire safety responsibilities and how PlanPoint can help with professionally drafted evacuation diagrams.

General information only · requirements depend on the property

Framed fire evacuation diagram mounted on the wall of a holiday home entryway
Fig. 01 — evacuation diagram displayed in a holiday property
STRA Evacuation Diagrams

Starting from

$149AUD

Professionally drafted evacuation diagrams for NSW holiday properties.

Request a free quoteManaging multiple properties? Request a portfolio quote

What’s included

  • Drafting for a straightforward single-level property
  • Up to two individually orientated, location-specific diagrams
  • Prepared using client-supplied floor plans and property information
  • Digital delivery of completed diagrams
  • Draft review and minor corrections within the agreed scope

Additional floors, diagram locations and complex layouts are quoted individually. Final pricing depends on your property’s requirements.

Digital drafting only. Printing, installation, site inspections and compliance certification are not included. Property owners are responsible for verifying supplied information and applicable requirements.

Start here

Not Sure What Your Property Needs?

Every short-term rental property is different. Select the option that best describes your property to better understand the fire safety requirements you may need to consider.

Standalone Holiday House · overview

A standalone holiday house

A standalone holiday house is usually let as a whole dwelling, with no host present during a guest's stay. In NSW, STRA properties of this kind need to meet the applicable fire safety requirements for short-term rental accommodation, and the owner or manager is the person responsible for arranging them.

The practical starting point is to work out what the property currently has in place, then compare it with what the applicable standard expects for a dwelling of that size, layout and use.

Key areas to review
  • Evacuation diagrams, and where they need to be displayed
  • Smoke and heat alarms, where applicable
  • Emergency evacuation information for guests
  • Fire extinguishers and fire blankets, where required
  • STRA registration and other owner responsibilities

The precise requirements depend on the dwelling and its circumstances: its layout, how many levels it has, how it is used and whether a host is present. Two similar-looking houses can be treated differently.

Request an Evacuation Diagram Quote
01 / The basics

What is Short-Term Rental Accommodation?

Before the drawings, the definitions. A few minutes here makes the rest of the page much easier to follow.

Short-term rental accommodation, or STRA, generally refers to residential accommodation provided to guests on a short-term commercial basis. It covers more than one kind of property: a whole house let out for weekends, a granny flat above the garage, a room in a home where the owner is present, or a holiday house managed on someone else’s behalf.

NSW has specific planning and fire safety requirements for STRA properties. The planning framework governs how STRA operates, including day limits in some areas and a requirement to register the property. Separately, a Fire Safety Standard sets out the minimum fire safety measures expected for STRA premises.

Hosted STRA

The host lives on the property and lets part of it, often a room or a self-contained area, while they are present.

Non-hosted STRA

The guest has the property to themselves: a whole dwelling, or a separate dwelling such as a granny flat, with no host present.

The two are treated differently under the planning framework, and the fire safety requirements can differ between them. A property is not automatically exempt because it is listed as hosted, and the same dwelling can fall into different categories depending on how it is actually used.

If you rent out your holiday home to visitors for weekends or short stays, your property may fall under NSW’s STRA framework.

NSW Government STRA guidance ↗
02 / Requirements

Understanding Your STRA Fire Safety Responsibilities

If you own or manage an STRA property, the responsible party needs to consider how the NSW STRA Fire Safety Standard applies to it. Here are the measures the Standard deals with, in plain English.

  1. 01

    Smoke and heat alarms

    Working smoke alarms are the baseline measure for STRA premises. The Standard sets out where alarms are needed and, depending on the property, whether they must be interconnected or hard-wired.

  2. 02

    Evacuation diagrams

    A drawing that shows guests the layout, the exits and the route out, displayed where a guest can actually find it. Required in certain STRA premises.

  3. 03

    Emergency information and advice

    Plain written information for guests: what to do if there is a fire, where to assemble, and how to raise the alarm. Often displayed alongside the diagram.

  4. 04

    Fire extinguishers and fire blankets

    Required in some circumstances, commonly in or near a kitchen. The Standard sets out when these apply, and they need to be in place and maintained.

  5. 05

    Doors, exits and safety equipment

    Exits that open as intended and stay clear, keys or latches that guests can operate in the dark, and safety equipment that is present, charged and not buried behind furniture.

  6. 06

    Registration and owner responsibilities

    Separately from fire safety, STRA properties in NSW may need to be registered on the NSW STRA Register, and hosts have obligations to guests, neighbours and insurers.

Important

The precise requirements depend on the property type, its classification and the circumstances. A two-bedroom cottage, a lodge split across four levels and a converted studio do not carry identical measures, and two properties on the same street can be treated differently. Treat this list as a starting point for your own enquiries, not as a checklist for every property.

Read the NSW STRA Fire Safety Standard ↗
03 / Evacuation diagrams

What Exactly Is an Evacuation Diagram?

If you have never seen one, the name sounds more technical than the thing itself. An evacuation diagram is a visual representation of a property’s layout that helps the people inside it understand where they are, where the exits are, and how to leave safely.

PlanPoint fire evacuation diagram for a two storey STRA property, showing the floor plan, egress route, You Are Here marker, legend and assembly point map
PlanPoint drawing example — Heysen Alpine House — East Jindabyne
  • 01

    Title and property details

    The property, address, floor and drawing revision, so a guest and an inspector both know which document they are looking at.

  • 02

    Simplified floor plan

    The building layout reduced to what matters in an emergency: rooms, doors, corridors and stairs.

  • 03

    Exits and evacuation route

    The path a guest should take from the marked location to a safe exit, shown as a clear egress line.

  • 04

    “You Are Here” marker

    The one thing that makes a diagram useful: where the person reading it is standing right now.

  • 05

    Equipment and legend

    Fire extinguishers, blankets, hose reels and call points, keyed to a legend so the symbols are not a guessing game.

  • 06

    Assembly information

    Where to go once outside, with a small site map when the assembly area is not obvious from the door.

The exact content of a diagram follows the applicable standard and the property itself. A single-level cottage and a lodge with four separate entries will not produce the same drawing.

Diagrams matter more in holiday accommodation than almost anywhere else. A guest arrives at night, in an unfamiliar building, sometimes with children, and has no memory of which corridor leads where.

A clear diagram gives them one thing they would otherwise have to guess: which way out, and how far it is. That is the entire purpose of the drawing, and it is why the layout has to be right rather than generic.

04 / Your property

Does My Holiday Property Need an Evacuation Diagram?

This is the question most owners arrive with. The honest answer is that it depends on the property, so here is how the obligation actually works.

The NSW STRA Fire Safety Standard sets out fire safety requirements for STRA premises, and evacuation diagrams form part of that framework in certain circumstances. Whether they apply to your property, and what they must show, depends on how the property is classified, whether a host is present, and the building itself.

Where diagrams are required, they also need to be displayed rather than filed away. In practice that means somewhere a guest will find them on arrival or while moving through the property.

Typical placement
  • At or near the main guest entry
  • On each level guests can access
  • In separate guest areas that have their own way out
  • Where guests will see them on arrival, not tucked into a folder

The number of diagrams and their placement follow the property’s layout: each level, each separate guest area, and each point where a guest has to decide which way to go. There is no single number that suits every property, and anyone who quotes you a fixed count without asking about the layout is guessing.

A guest staying in an unfamiliar holiday home should be able to locate the property’s evacuation information and understand how to exit safely during an emergency.

NSW STRA Fire Safety Standard (PDF) ↗
05 / What to send

Getting Started Is Easier Than You Might Think

PlanPoint prepares technical drawings remotely, using information supplied by the customer. You do not need a tidy set of architectural drawings to begin.

  • Property address, and how many levels or buildings are involved
  • An existing floor plan, if you have one
  • A hand-drawn layout or sketch if no floor plan exists
  • Where the entrances and exits are
  • Locations of smoke alarms, extinguishers, blankets or hose reels
  • Photographs of rooms, entries and the outside of the property
  • Anything else you know about the site: stairs, decks, detached structures

Send whatever you have — a PDF from the real estate listing, a phone photo of a printed plan, or a sketch on paper. If something is missing we will ask, and a quote can be prepared before a finished floor plan exists.

One responsibility stays with you: the owner or responsible party must verify the accuracy of the property information and the final diagram details. We draw what we are given, and you confirm it matches the property.

Submit your property details
06 / Working with PlanPoint

Professional STRA Evacuation Diagram Drafting

PlanPoint specialises in producing clear, property-specific evacuation diagrams from information supplied by the client. No site visit, no showroom drawings, no diagram recycled from another property.

  • Clear, easy-to-understand drawings

    Drawn for a guest who has never been inside the property rather than for someone who already knows it.

  • Professional, consistent presentation

    The same drawing style, legend and title block across every property you manage.

  • Remote drafting

    Prepared from the information you send. No initial site visit is needed to produce the drawing.

  • Digital delivery

    Print-ready PDF files you can send to a printer, hand to a manager, or keep on file.

  • A straightforward review process

    You review the draft, mark up anything that does not match the property, and we revise it.

  • One property or a portfolio

    The same process whether it is a single holiday home or a set of properties across a region.

Scope of service

PlanPoint provides technical drafting services. We do not independently inspect, certify or approve property compliance, and we do not supply, install or maintain fire safety equipment. A PlanPoint drawing supports the arrangements you make as the owner or responsible party; it does not replace verification by the relevant authority or a suitably qualified professional.

07 / The process

Our simple three-step process

  1. 01Step 01

    Send us your property details

    Complete the online enquiry form and provide your floor plan, sketch or the relevant property information.

  2. 02Step 02

    We prepare your diagram

    PlanPoint drafts the evacuation diagram using the supplied information and the applicable drawing requirements.

  3. 03Step 03

    Review and receive

    Review the draft, confirm the site-specific information is accurate, and receive the final digital files.

The customer remains responsible for arranging printing, installation of the finished diagrams, and any compliance verification required for the property.

Property managers & agencies

Evacuation Diagram Drafting for Property Managers

Looking after holiday rentals in Jindabyne, the Snowy Mountains or anywhere across NSW, the coordination is usually harder than the drawing. PlanPoint works with owners and managers to keep that part simple: one checklist per property, one point of contact, and files delivered in the same format every time.

Discuss your property portfolio
  • Consistent diagram presentation across every property
  • One information checklist per property, so requests do not bounce back and forth
  • A single point of contact for portfolio-wide drafting
  • Digital files named and delivered in the same format each time
  • Drafting support as properties are added, sold or updated
08 / Questions

STRA fire safety, answered simply.

The questions owners and managers ask most often. If yours is not here, ask it in the enquiry form and we will answer it in plain English.

Not Sure Where to Start?

Whether you manage one holiday home or an entire portfolio of short-term rentals, PlanPoint can help you get started with clear, professionally drafted evacuation diagrams.

This page provides general information about short-term rental accommodation and fire safety documentation in NSW. It is not legal or compliance advice, and requirements depend on the individual property, how it is used and the applicable standard. Always check the current NSW Government STRA guidance and the NSW STRA Fire Safety Standard, or seek advice from a suitably qualified professional, for your own circumstances.